www.baumerelectric.com 3. 28 general data features mechanical data absolute multi-turn hollow shaft encoder bomh exible ? dignalizer pro bus-dp, canopen, devicenet, ethercat voltage supply 10 - 30 vdc supply current 100 ma (at 24 vdc) no load max. resolution pro bus-dp, devicenet single-turn 18 bit (1 step = 5? multi-turn 13 bit (8?92 revolutions) canopen single-turn 18 bit (1 step = 5? multi-turn 14 bit (16?84 revolutions) repeatability 0,012 output circuit rs 485 preset in state data-exchange encoder can be set to a prede ned position address selectable via dip switches baud rate selectable via dip switches direction of rotation looking at the ange, position counts up as the shaft rotates clockwise (cw), programmable max. revolutions mech. 6'000 rpm electr. 6'000 rpm moment of interia typ. 18,4 x 10 -7 kgm 2 torque typ. 1,75 cnm (3?00 rpm / 20 ? / ip 42) product life depending on ambient conditions (typ. 10 9 revolutions) max. protection class ip 65 material housing: aluminum bus cover: zinc die cast weight approx. 650 g ambient conditions ? high resolution multi-turn encoder - 18 bit single-turn - 14 bit multi-turn ? modular bus cover ? simple mounting via servo ? ange ? programmable bus parameters ? programmable resolution and preset values temperature range -20...+85 ? relative humidity max. 95% non condensing vibration iec 60068-2-6 (sine) ( 100 m/s 2 / 10 - 2?00 hz) 150 min per axis vibration iec 60068-2-64 (random) ( 0,1 g 2 /hz / 20 - 1?00 hz) 30 min per axis shock iec 60068-2-27 ( 500 m/s 2 / 11 ms) 10 pulses per axis and direction noise immunity en 61000-6-2 emitted interference en 61000-6-3
dignalizer pro bus-dp, canopen, devicenet, ethercat bomh 58s1n 24c g bomh 58s1n 24 www.baumerelectric.com 3 75 10 15? 18 12 h7 ?20 42 2 1 50 2,2 m4 m4 x 6 3 x 120? 68 77 33 50 0 -0,025 58 h10 3. 29 dimensions order designation shaft interface b canopen d devicenet p pro bus-dp e ethercat resolution single-turn / multi-turn 18 / 14 bit canopen, ethercat 18 / 13 bit pro bus-dp, devicenet other resolutions programmable b2 hollow shaft 12 mm ip 42 with clamping ring p2 hollow shaft 12 mm ip 65 with clamping ring i2 hollow shaft 12 mm ip 42 with clamping ring and spring plate m2 hollow shaft 12 mm ip 65 with clamping ring and spring plate cd-rom with gsd-/eds-/xml- part nr. 147362 les and manuals bus cover see chapter accessories for pro bus-dp part nr. 140831 for canopen part nr. 140832 for devicenet part nr. 140833 for ethercat part nr. 159110 accessories base encoder without bus cover complete encoder bomh exible -d bus cover -p bus cover -e bus cover -e bus cover -b bus cover d bus cover with pg radial (for interface b , d , p ) e bus cover with connector m12 radial (for interface e ) connection cable ethercat m12 male-male, d-coded m12 straight, 5 m part nr. 160565 spring plate set part nr. 136635 emc cable gland for cable- ?4,5-6 mm emc cable gland for cable- ?8-10 mm locking plug cable gland for cable- ?6-10,5 mm a b ub gnd a b ub gnd emc cable gland for cable- ?4,5-6 mm emc cable gland for cable- ?8-10 mm 4-pin receptacle m12, male 4-pin receptacle m12, female, d-coded 4- p in rece p table m12, female, d-coded
|
